25. June 2011 00:16
This is the first of four posts. Check back soon (or subscribe to our feed) to get the rest of the story.
While many are in vacation mode during the summer months, we always suggest that you do not take a vacation from your business or take away time to start your business. If your goal is to make and sell candles for the holidays, then it is very important that you start the process now. It will take you time to choose the proper wax, select the proper wick and start identifying which fragrances to offer. The summer months are an excellent time to begin and perfect this process.
During the summer, many suppliers are somewhat slower and you can have more access to the technical people during this time period. Orders can be shipped in more timely time period which can help you do your testing faster. Sometimes the best sales are held by suppliers to ensure people purchase products during the summer months. Use all of these advantages from the supplier to your favor as you start your company or look to grow.
Up next...Summer Ideas to Help New Businesses
1. June 2011 20:44
When using aluminum molds, there are a few tips and techniques that will help you regardless of the method you use.
1. Take good care of your molds. Do not use them for any other use such as a penholder or thermometer holder because you may scratch the inside, which will be apparent on the finished candle.
2. By heating or cooling the mold, you can achieve different aesthetic qualities to the finished mold. Cold molds give a primitive appearance, while warm molds may give a good gloss.
3. Keep molds level unless a desired layered appearance is trying to be obtained. By resting the mold on various angles, some neat stripes can be achieved.
4. Take careful note on the pour temperatures. By adjusting the temperature, you can control the shrinkage. Pouring too hot produces more shrinkage and may involve more “topping off”, while pouring too cool may not give you enough shrinkage therefore making it difficult to de-mold.
5. For making perfect bottoms on your pillars, Candlewic highly recommends using a heated base leveler level pillars every time.
1. June 2011 20:43
There are two wicking techniques that are most commonly employed when using aluminum molds. You can use the traditional method or the pillar pin method. Both techniques work well depending on the volume of candles produced or the amount of labor available.
The Traditional Method
The traditional method involves the mold, raw wicking on a spool, a wick bar, and a rubber plug. This method is best for lower volume production, or in the instance when you want to leave a little length of wick on the candle to attach a bead or a tag. You simply thread the wick through the mold and place a rubber plug into the small hole to hold the wick in place. Place a wick bar across the large opening of the mold and wrap the wick around the bar and pour the wax. After the wax has cooled, the finished product will have the wick nicely centered down the middle of the candle.
The Pillar Pin Method
The pillar pin method involves a round mold, a pillar pin, and a pre-wick assembly. This method is better suited for the small to large production run. Basically, you are making a candle with no wick and inserting a wick after it cools. There are 2 ways to use the pin. You can either stick the disc part of the pin down into the mold or stick the pin up through the mold from the outside bottom. Pour the wax and let cool. When you are done, you will have a candle with a hole through the center core and no wick. Take a wick assembly and insert up through the hole and you are done. The wick will be perfectly centered.
1. June 2011 20:43
Aluminum molds for making freestanding candles are a great investment as an inexpensive way to extend your line of candles.
Selecting your mold can be fun. Candlewic offers many shapes and sizes depending on which pillar would best complement your existing line of candles. There are round molds, octagon molds, square molds plus many other unique shapes in our designer series of polycarbonate molds.
1. June 2011 20:42
Jars have become so popular in recent years, that many candle makers have forgotten that pillar candles add a real touch of beauty to any home’s décor.
Pillar candles offer extremely vibrant colors due to the fact there is no glass blocking the true color of the candle as seen with the naked eye.
The profit margin on pillar candles may be higher as well because the price of the glass is removed from the cost of raw materials. Aluminum does not rust, so you can enjoy your molds for many years.