23. January 2013 02:02
One of the looks most often associated with heavily fragranced candles is the mottled look. This look can be easily accomplished with containers, pillars and votives. It requires starting with the right wax. Not all waxes will mottle, so using the right wax is essential.
The first step is to decide what type of candle you will be making and choosing the appropriate wax for that application.
Select, clean, wick, and prepare your jars or molds as you normally do.
Melt your wax, add color and 5% fragrance.
Once the candle has been poured and is completely cooled, remove it from the mold.
Pour your wax between 165-175°F.
Pillars and votives: Top off your candle. When the top off completely hardens, remove it from the mold.
Containers: Top off candle.
Special Notes on Mottled Candles:
The reaction between the fragrance and the wax (causing it to fracture) is what causes the mottling. The fragrance and the process can have an impact on the level of mottling. If you do not achieve the desired mottling, try pouring cooler first and then hotter until the desired result is achieved.
10. March 2010 01:21
This project features a useful item to add to your operation regardless of your size. Tea lights are a great way to use up extra wax, create little "calling cards", or offer prospective customers a chance to sample your scents before purchasing a larger candle.
Below you will find the instructions for using our tea light mold that ensures perfectly straight wicks, but alternative techniques follow.
Lay the mold release over the entire mold.
Prepare wax with color and fragrance to suit. Pour wax into the mold so that all cavities are filled. There is a lip that holds overflow wax.
Remove pins and pop the tea lights out of the mold. Clean any overly rough edges with your fingers.
Insert a pre-assembled wick assembly into the hole in the candle and place into a tea light cup. You will notice that tea light cups have a small circular indentation on the bottom. This indentation is 15mm and is designed to match our 15x3mm wick tabs.
When pouring batches of wax, keep a few tea light cups on hand to pour excess wax directly into the cups. This is also the method used for pouring tea lights when using container wax. If you currently use a M-63-P votive pin for your votives, it will fit into the tea light cups as well. Simply place the pin in the tea light cup and pour a votive or pillar wax into the pin/cup set up. After it cools remove the wax/pin from the cup, flip the candle over and put back into the tea light cup. This will result in a beautiful recessed top.
10. March 2010 00:52
We are going to make this month's project relatively simple so it will allow you to approach the project from several different angles.
- With summer rapidly approaching many people start to reduce the amount of time spent inside thus burning less candles. This project will allow you to make a candle that your customer can burn outside when enjoying a nice Spring or Summer night on the patio. Citronella candles remain a popular outside candle.
- We featured what to do with small amounts of left over wax you could use the wax from a large container/pillar that did not meet your expectation.
- It can be made 100% natural
Take the wax you have selected and heat up to recommended temperature:
- If using Soy 120 or Soy 125, heat to 125F and add your fragrance. For best results add approximately 1 ounce per pound of wax.
- If using the Container Fill, heat it up to 150F-160F and use the same amount of fragrance.
- If you are using your left overs, follow the recommended pouring temperatures.
Take your wick and feed through the wick assembly. Take needle nose pliers and pinch the clip. Place in the container and secure with Glue Dot. Pour your wax in at the recommended temperatures above.
Due to the size of this container several topping offs will be necessary. .
This project should be easy and makes for a great outdoor candle. If you use the soy wax, you can market it as a very "green candle".