9. June 2009 20:50
Melt wax to 150-160deg F. Preheat container.
Pour water in glass container and measure the amount of water your container will hold to figure out how much wax will be needed to make the candle. Once the required amount has been established, put the same amount of wax plus ¼ of a cup excess in your melt pot.
Secure the required length of wick to a wick tab (depending on the height of your container). Place a few drops of wax in the bottom of the container and place your wick tab and attached wick in the wax. Let cool. This will secure your wick to the appropriate location in your container and ensure your wick stays centered as you pour your candle Use wick guidelines as a basis for deciding where to place your wicks.
Take 1/3 of the wax in a measuring cup and add 1/8 of a square of your first color of concentrated candle dye. Make sure the wax is hot enough so the dye will dissolve quickly and that you can pour it before it gets too cold.
Take the glass container and prop it up at the desired angle. Make sure the container is secure and will not fall over as you pour your wax. Books work well for this, but you must be sure to cover them with aluminum foil or newspaper before pouring your wax to guard against any spills.
Carefully pour the wax in the container and let cool.
Once wax has completely cooled and hardened, place the container flat on the counter again and prepare to pour the next layer. Prepare your wax as in Step 4 again but this time add 1/8 of a square of your second color of Concentrated Color Squares. Pour this wax into your container.
When the second layer of wax has completely cooled and hardened, add your last layer of wax. Once again prepare your wax as in step 4, but use 1/8 of a square of your third color of Concentrated Color Squares. This time do not pour all of the wax into the candle. Keep a small portion of wax to pour over the candle to fill the depression that forms as the candle cools. Make sure you save enough wax to cover the entire top of the candle on your second pour (to ensure a smooth top surface).
Try making these candles using more layers at different angles or use different shapes of containers.
You can also make layered votives or floaters using these same steps!
Layered pillar candles are also a unique addition to any gift or home décor!